Dial

Indexes

Arabic Numerals

Details

Black carbon fiber lower flange with fine printed minutes and fraction of a seconds track, also set with index points filled with approved luminous material, Black carbon fiber upper flange with white printed 60 minutes graduation in 5 minutes increment, Bold "RICHARD MILLE" logo is located at 12 o'clock, Hour and minute hands with red tip, Rrinted "RM010" on the sapphire dial and red date window rim with diagonal stripes, Sapphire dial (thickness: 0.40 mm) with anti-glare treatment (both sides), protected by 8 silicon braces inserted in the upper and lower grooves, Seconds hand with red arrow tip, The calendar disc of sapphire crystal is treated with non-reflective coating on both sides

Movement

Power Reserve

55 Hours

Functions

Hours, Minutes, Seconds, Date

Jewels

32

Frequency

28,800 VpH (4 Hz)

Oscillator

Elinvar balance spring, Glucydur balance wheel

Winding

Unidirectional; anti-clockwise winding direction

Dimensions (in mm)

30.25 x 28.45

Height (in mm)

4.33

Caliber

RMAS7

Movement

Self-winding mechanical with adjustable rotor geometry

Bracelet

Material

Black Rubber

Clasp

Deployment buckle

Bracelet

Black rubber strap

Case

Shape

Tonneau

Model Case

Brushed finished black DLC treated Titanium case, Martin Brundle's initial "MB1" engraved just under Richard Mille at the top of the case-back, Transparent case back with sapphire crystal, Tripartite case ensured by two Nitril O-ring seals, assembled with 12 spline screws in grade 5 titanium and abrasion resistant washers in 316L stainless steel, “Richard Mille” engraved on the back of the case situated on the inside curve

Water Resistance

50 m (5 ATM, 165 ft)

Crystal

Bezel side (1.20mm) : In sapphire (1800 Vickers) with anti-glare treatment (both sides), Case back (at the center 1 mm and outer edges 1.73 mm) : In sapphire with anti-glare treatment (both sides)

Bezel

Fixed, brushed finished black DLC treated Titanium

Dimensions (in mm)

48 x 39.30 x 13.84

Material

Black DLC treated Titanium

Winding Crown

Black DLC treated titanium, with double seal O-ring and collar in Red