Refine search

Brand :Richard Mille

Collections

Men's Collection(2)

RM 010(1)

RM 030(3)

RM 037(1)

RM 028(1)

Details

Bezel

Fixed(1)

Fixed, brushed finished Titanium(4)

Fixed, brushed finished black DLC treated Titanium(1)

Built up of three layers connected with 22 screws, turning unidirectionally following ISO 6425 norms to avoid timing miscalculations(1)

Additional screwed system attaching the bezel to the watch case(1)

Starting at 12 o'clock, the five-minute markers of the first quarter are highlighted RED(1)

Fixed black nanotube carbon(1)

Frequency

21,600(1)

21,600 vph(1)

28,800 VpH (4 Hz)(6)

Functions

Tourbillon(1)

Hours, minutes(2)

Hours, Minutes, Seconds, Date(4)

Chronograph(1)

Date(2)

Hours, minutes, small seconds(1)

Month(1)

Countdown timer(1)

Hours and minutes(1)

Function selector : W (winding), N (neutral), H (hand setting)(1)

Adjustable rotor geometry(2)

Power reserve indicator(2)

Winding indicator(2)

Declutchable and adjustable rotor geometry(1)

Winding

Hand-wound(1)

Hand winding(1)

Unidirectional; anti-clockwise winding direction(5)

Bidirectional automatic winding(1)

Jewels

19(1)

29(1)

32(2)

62(1)

25(1)

40(2)

Power Reserve

45 Hours(1)

42 Hours(1)

55 Hours(4)

50 Hours(2)

Material

Black Rubber(8)

Anthracite polymer injected with carbon nanotubes(1)

Titanium(5)

Black DLC treated Titanium(1)

Black nanotube carbon(1)

Black DLC coated Titanium(1)

Issue limited to only:

50(1)

30 pieces, only available through Richard Mille boutiques and Authorized Dealers in North and South America(1)

Clasp

Deployment buckle(7)

Titanium deployant buckle(1)

Details

Minute markers around the outer rim(1)

Skeletonized dial(1)

Luminescent dots on the hour indexes(1)

Skeletonized hour and minute hands(3)

Bold "RICHARD MILLE" logo is located at 12 o'clock(8)

Large Roman numeral hour markers(1)

Minute flange in black carbon fiber(1)

Interior flanges in carbon fiber, with hour index points filled with approved luminous material(1)

Brushed finished silver-tone hands with luminous highlights(1)

Sapphire dial (thickness: 0.40 mm) with anti-glare treatment (both sides), protected by 8 silicon braces inserted in the upper and lower grooves(4)

The calendar disc of sapphire crystal is treated with non-reflective coating on both sides(4)

Black carbon fiber upper flange with white printed 60 minutes graduation in 5 minutes increment(4)

Black carbon fiber lower flange with fine printed minutes and fraction of a seconds track, also set with index points filled with approved luminous material(4)

Seconds hand with red arrow tip(3)

Hour and minute hands with red tip(1)

Rrinted "RM010" on the sapphire dial and red date window rim with diagonal stripes(1)

Red printed "RM011" on the sapphire dial and red date window rim with diagonal stripes(1)

Black carbon fiber flange with white printed 60 minutes graduation in 5 minutes increment, also set with index points filled with approved luminous material(1)

Sapphire dial (thickness: 0.80 mm) with anti-glare treatment (both sides), protected by 8 silicon braces inserted in the upper and lower grooves(1)

Brushed finished red gold hands(1)

Laser-engraved Roman numerals, red printed RM 037 and red accented apertures(1)

Two skeletonized calendar discs over a white field and changes date virtually instantaneously(1)

Sapphire dial with anti-glare treatment (both sides)(1)

Seconds hand with red arrow luminous filled tip(1)

Brushed finished luminous filled hands(1)

Dial with red date window rim and red accents(1)

Yellow printed "RM030" on the sapphire dial and yellow date window rim with diagonal stripes(1)

Bright orange upper flange with white printed 60 minutes graduation in 5 minutes increment(1)

Orange lower flange with fine printed minutes and fraction of a seconds track, also set with index points filled with approved luminous material(1)

Skeletonized hour and minute hands with orange accented tips(1)

Seconds hand with orange arrow tip(1)

White printed "RM030" on the sapphire dial and white date window rim with diagonal stripes(1)

Height (in mm)

7(1)

2.6(1)

4.33(2)

9(1)

4.82(1)

5.59(2)

Complication

Tourbillon at 6 o'clock(1)

Semi-instantaneous date display, placed in a vertical aperture at 7 o’clock(4)

Annual Calendar(1)

Flyback chronograph(1)

Small seconds counter at 3 o'clock(1)

Semi-instantaneous month display indicated with Arabic numerals, placed between 4 and 5 o’clock(1)

Semi-instantaneous, placed in a red outlined horizontal aperture under 12 o’clock(1)

60-minute countdown timer located at 9 o'clock position(1)

60-minute and 12-hour totalizer located at 6 o'clock position(1)

Function window at 4 o’clock(1)

An over-sized date display is located under 12 o’clock(1)

Power reserve indicator located at the 9 o'clock position(2)

Winding phase (on) or is disengaged (off), rewinding indicator located at 12 o’clock(2)

Indexes

Dot hour markers(1)

Roman Numerals(2)

Arabic Numerals(5)

Indices(1)

Bracelet

Black rubber strap(7)

Black rubber diving strap(1)

Shape

Tonneau(6)

Round(2)

Movement

Mechanical manual winding(1)

Self-winding mechanical(2)

Self-winding mechanical with adjustable rotor geometry(3)

Self-winding mechanical with automatic declutching rotor(2)

Oscillator

Free sprung balance with variable inertia(4)

Elinvar balance spring(4)

Elinvar Nivarox balance spring, Glucydur balance wheel(3)

Glucydur balance wheel(1)

AK3 balance spring(1)

Model Case

Spline screws in grade 5 titanium(2)

Anthracite polymer injected with carbon nanotubes(1)

Caseback features monobloc constructions for evermore improved lightness and rigity(1)

Titanium(1)

Tripartite case assembled with 16 spline screws in grade 5 titanium and abrasion resistant washers in 316L stainless steel and complemented by the additional integration of the lugs into the case’s torque screw system(1)

Ensured by two Nitril O-ring seals(1)

Transparent case back with sapphire crystal(6)

“Richard Mille” engraved on the back of the case situated on the inside curve(6)

Brushed finished black DLC treated Titanium case(1)

Tripartite case ensured by two Nitril O-ring seals, assembled with 12 spline screws in grade 5 titanium and abrasion resistant washers in 316L stainless steel(1)

Martin Brundle's initial "MB1" engraved just under Richard Mille at the top of the case-back(1)

Brushed finished titanium case(4)

Tripartite case ensured by two Nitril O-ring seals, assembled with 16 spline screws in grade 5 titanium and abrasion resistant washers in copper-nickel-zinc alloy(1)

Tripartite case ensured by two Nitril O-ring seals, assembled with 20 spline screws in grade 5 titanium and abrasion resistant washers in 316L stainless steel(3)

18-carat red gold pusher at 4 o’clock allows one to select the winding (W), neutral (N) and hand setting (H) functions with a simple push, the second pusher, at 10 o’clock, controls date changes(1)

Curved tripartite case design with torque screws that can be individually and precisely tensioned with high accuracy around the exterior circumference of the case(1)

Eight-point-star-shaped torque and spline screws in Grade 5 Titanium(1)

Case thickness: 14.6 mm(1)

Superlight black nanotube carbon(1)

Crystal

Antireflective coating Sapphire(1)

Bezel side: in sapphire (1,800 Vickers) with anti-glare coating (2 sides). Thickness: 1 mm(1)

Case back: in sapphire with anti-glare coating (2 sides). Thickness: at the center 1.00 mm and outer edges 1.53 mm(1)

Bezel side (1.20mm) : In sapphire (1800 Vickers) with anti-glare treatment (both sides)(2)

Case back (at the center 1 mm and outer edges 1.73 mm) : In sapphire with anti-glare treatment (both sides)(2)

Bezel side (1.30mm) : In sapphire (1800 Vickers) with anti-glare treatment (both sides)(1)

Case back (at the center 0.95 mm and outer edges 1.66 mm) : In sapphire with anti-glare treatment (both sides)(1)

Bezel side (3 mm) : In sapphire (1800 Vickers) with anti-glare treatment (both sides)(1)

Case back (at the center 1.90 mm and outer edges 2.60 mm) : In sapphire with anti-glare treatment (both sides)(1)

Bezel side (1.50mm) : In sapphire (1800 Vickers) with anti-glare treatment (both sides)(2)

Case back (at the center 1.20 mm and outer edges 2.04 mm) : In sapphire with anti-glare treatment (both sides)(2)

Dimensions (in mm)

48 x 39.7(1)

33(1)

30.25 x 28.45(5)

48 x 39.30 x 13.84(1)

50 x 40 mm x 16.15(1)

52.2 x 34.4 x 12.5(1)

28 x 22.9(1)

50 x 42.70 x 13.95(2)

Caliber

RMXP1(1)

RMAS7(2)

RMAC1(1)

CRMA1(1)

RMAR1(2)

Water Resistance

30 meters / 100 feet(1)

50 m (5 ATM, 165 ft)(5)

300 m (1,000 ft)(1)

Diameter (in mm)

45.7 x 6.3(1)

47(1)

Winding Crown

Ceramic with double seal O-ring and detailing in titanium(1)

Black DLC treated titanium, with double seal O-ring and collar in Red(1)

Grade 5 titnium crown with double seal O-ring and collar in Alcryn(1)

Red gold crown with a rubber knurled grip(1)

The pushers are also constructed of red gold(1)

Screwed crown construction with fluted black crown guard(1)

Titanium torque-limiting crown with black crown guard(1)

Black DLC coated titanium torque-limiting crown with orange crown guard(1)

Or enter your e-mail address